Latest mountain bike news

Hannah Nordhaus wrote <a href="http://www.rockymountainnews.com/drmn/other_recreation/article/0,2777,DRMN_23950_5700563,00.html">an article</a> for the Rocky Mountain News website a couple days ago about the new paved bike loop in Leadville, CO where she waxed poetically about the virtues of loop trails. I've been obsessed with loops almost since I began mountain biking and I think it's for many of the reasons Hannah mentions.

Mountain bike trail networks are unsatisfying to me because you can almost never ride every inch of trail without doing some planning and/or backtracking. Multiple loops are okay in my mind since it's a bit easier to string them together but networks with cut-throughs and spider-web patterns just aren't as fun for some reason. And forget about trying to map a network trail - it's tough no matter how you choose to attack it.

Ditto for out-and-back trails, though the Rocky Mountain News article already covers the reasons these trails don't satisfy. Why backtrack when you can see new stuff?

Lollipop loops are often necessary and I guess these don't bother me as long as the "stick" isn't too long. The stick is just an annoying out and back section so it's not surprising that lollipops aren't as fun as loops.

Figure 8 trails are pretty cool but I'm always a little disappointed when I get to the intersection of the two loops since I know I'll be eventually be back. In this case two loops aren't better than one.

One way to make loop trails EVEN BETTER is to alternate travel from day to day. That way riders can experience the trail from both directions without having to worry about encountering oncoming traffic.

There's just something about the sense of accomplishment you get from riding a mountain bike trail loop that other trail configurations can't match. Trail builders take note!
Hannah Nordhaus wrote <a href="http://www.rockymountainnews.com/drmn/other_recreation/article/0,2777,DRMN_23950_5700563,00.html">an article</a> for the Rocky Mountain News website a couple days ago about the new paved bike loop in Leadville, CO where she waxed poetically about the virtues of loop trails. I've been obsessed with loops almost since I began mountain biking and I think it's for many of the reasons Hannah mentions.

Mountain bike trail networks are unsatisfying to me because you can almost never ride every inch of trail without doing some planning and/or backtracking. Multiple loops are okay in my mind since it's a bit easier to string them together but networks with cut-throughs and spider-web patterns just aren't as fun for some reason. And forget about trying to map a network trail - it's tough no matter how you choose to attack it.

Ditto for out-and-back trails, though the Rocky Mountain News article already covers the reasons these trails don't satisfy. Why backtrack when you can see new stuff?

Lollipop loops are often necessary and I guess these don't bother me as long as the "stick" isn't too long. The stick is just an annoying out and back section so it's not surprising that lollipops aren't as fun as loops.

Figure 8 trails are pretty cool but I'm always a little disappointed when I get to the intersection of the two loops since I know I'll be eventually be back. In this case two loops aren't better than one.

One way to make loop trails EVEN BETTER is to alternate travel from day to day. That way riders can experience the trail from both directions without having to worry about encountering oncoming traffic.

There's just something about the sense of accomplishment you get from riding a mountain bike trail loop that other trail configurations can't match. Trail builders take note!
A Garmin Edge 305 bike computer displaying metrics such as time (02:16:46), speed (38.6 km/h), total distance (64.6 km), elevation (364 m), and heart rate (139 bpm) on a dark screen with a gray casing.
  1
**Alt Text:** A chart outlining a trail difficulty rating system, including categories for trail width, tread surface, average trail grade, maximum trail grade, and natural obstacles. The system ranges from easiest (white circle) to extremely difficult (double black diamond), with specific criteria for each rating level.
Hannah Nordhaus wrote <a href="http://www.rockymountainnews.com/drmn/other_recreation/article/0,2777,DRMN_23950_5700563,00.html">an article</a> for the Rocky Mountain News website a couple days ago about the new paved bike loop in Leadville, CO where she waxed poetically about the virtues of loop trails. I've been obsessed with loops almost since I began mountain biking and I think it's for many of the reasons Hannah mentions.

Mountain bike trail networks are unsatisfying to me because you can almost never ride every inch of trail without doing some planning and/or backtracking. Multiple loops are okay in my mind since it's a bit easier to string them together but networks with cut-throughs and spider-web patterns just aren't as fun for some reason. And forget about trying to map a network trail - it's tough no matter how you choose to attack it.

Ditto for out-and-back trails, though the Rocky Mountain News article already covers the reasons these trails don't satisfy. Why backtrack when you can see new stuff?

Lollipop loops are often necessary and I guess these don't bother me as long as the "stick" isn't too long. The stick is just an annoying out and back section so it's not surprising that lollipops aren't as fun as loops.

Figure 8 trails are pretty cool but I'm always a little disappointed when I get to the intersection of the two loops since I know I'll be eventually be back. In this case two loops aren't better than one.

One way to make loop trails EVEN BETTER is to alternate travel from day to day. That way riders can experience the trail from both directions without having to worry about encountering oncoming traffic.

There's just something about the sense of accomplishment you get from riding a mountain bike trail loop that other trail configurations can't match. Trail builders take note!
  1
Hannah Nordhaus wrote <a href="http://www.rockymountainnews.com/drmn/other_recreation/article/0,2777,DRMN_23950_5700563,00.html">an article</a> for the Rocky Mountain News website a couple days ago about the new paved bike loop in Leadville, CO where she waxed poetically about the virtues of loop trails. I've been obsessed with loops almost since I began mountain biking and I think it's for many of the reasons Hannah mentions.

Mountain bike trail networks are unsatisfying to me because you can almost never ride every inch of trail without doing some planning and/or backtracking. Multiple loops are okay in my mind since it's a bit easier to string them together but networks with cut-throughs and spider-web patterns just aren't as fun for some reason. And forget about trying to map a network trail - it's tough no matter how you choose to attack it.

Ditto for out-and-back trails, though the Rocky Mountain News article already covers the reasons these trails don't satisfy. Why backtrack when you can see new stuff?

Lollipop loops are often necessary and I guess these don't bother me as long as the "stick" isn't too long. The stick is just an annoying out and back section so it's not surprising that lollipops aren't as fun as loops.

Figure 8 trails are pretty cool but I'm always a little disappointed when I get to the intersection of the two loops since I know I'll be eventually be back. In this case two loops aren't better than one.

One way to make loop trails EVEN BETTER is to alternate travel from day to day. That way riders can experience the trail from both directions without having to worry about encountering oncoming traffic.

There's just something about the sense of accomplishment you get from riding a mountain bike trail loop that other trail configurations can't match. Trail builders take note!
Hannah Nordhaus wrote <a href="http://www.rockymountainnews.com/drmn/other_recreation/article/0,2777,DRMN_23950_5700563,00.html">an article</a> for the Rocky Mountain News website a couple days ago about the new paved bike loop in Leadville, CO where she waxed poetically about the virtues of loop trails. I've been obsessed with loops almost since I began mountain biking and I think it's for many of the reasons Hannah mentions.

Mountain bike trail networks are unsatisfying to me because you can almost never ride every inch of trail without doing some planning and/or backtracking. Multiple loops are okay in my mind since it's a bit easier to string them together but networks with cut-throughs and spider-web patterns just aren't as fun for some reason. And forget about trying to map a network trail - it's tough no matter how you choose to attack it.

Ditto for out-and-back trails, though the Rocky Mountain News article already covers the reasons these trails don't satisfy. Why backtrack when you can see new stuff?

Lollipop loops are often necessary and I guess these don't bother me as long as the "stick" isn't too long. The stick is just an annoying out and back section so it's not surprising that lollipops aren't as fun as loops.

Figure 8 trails are pretty cool but I'm always a little disappointed when I get to the intersection of the two loops since I know I'll be eventually be back. In this case two loops aren't better than one.

One way to make loop trails EVEN BETTER is to alternate travel from day to day. That way riders can experience the trail from both directions without having to worry about encountering oncoming traffic.

There's just something about the sense of accomplishment you get from riding a mountain bike trail loop that other trail configurations can't match. Trail builders take note!
  1
Hannah Nordhaus wrote <a href="http://www.rockymountainnews.com/drmn/other_recreation/article/0,2777,DRMN_23950_5700563,00.html">an article</a> for the Rocky Mountain News website a couple days ago about the new paved bike loop in Leadville, CO where she waxed poetically about the virtues of loop trails. I've been obsessed with loops almost since I began mountain biking and I think it's for many of the reasons Hannah mentions.

Mountain bike trail networks are unsatisfying to me because you can almost never ride every inch of trail without doing some planning and/or backtracking. Multiple loops are okay in my mind since it's a bit easier to string them together but networks with cut-throughs and spider-web patterns just aren't as fun for some reason. And forget about trying to map a network trail - it's tough no matter how you choose to attack it.

Ditto for out-and-back trails, though the Rocky Mountain News article already covers the reasons these trails don't satisfy. Why backtrack when you can see new stuff?

Lollipop loops are often necessary and I guess these don't bother me as long as the "stick" isn't too long. The stick is just an annoying out and back section so it's not surprising that lollipops aren't as fun as loops.

Figure 8 trails are pretty cool but I'm always a little disappointed when I get to the intersection of the two loops since I know I'll be eventually be back. In this case two loops aren't better than one.

One way to make loop trails EVEN BETTER is to alternate travel from day to day. That way riders can experience the trail from both directions without having to worry about encountering oncoming traffic.

There's just something about the sense of accomplishment you get from riding a mountain bike trail loop that other trail configurations can't match. Trail builders take note!
Hannah Nordhaus wrote <a href="http://www.rockymountainnews.com/drmn/other_recreation/article/0,2777,DRMN_23950_5700563,00.html">an article</a> for the Rocky Mountain News website a couple days ago about the new paved bike loop in Leadville, CO where she waxed poetically about the virtues of loop trails. I've been obsessed with loops almost since I began mountain biking and I think it's for many of the reasons Hannah mentions.

Mountain bike trail networks are unsatisfying to me because you can almost never ride every inch of trail without doing some planning and/or backtracking. Multiple loops are okay in my mind since it's a bit easier to string them together but networks with cut-throughs and spider-web patterns just aren't as fun for some reason. And forget about trying to map a network trail - it's tough no matter how you choose to attack it.

Ditto for out-and-back trails, though the Rocky Mountain News article already covers the reasons these trails don't satisfy. Why backtrack when you can see new stuff?

Lollipop loops are often necessary and I guess these don't bother me as long as the "stick" isn't too long. The stick is just an annoying out and back section so it's not surprising that lollipops aren't as fun as loops.

Figure 8 trails are pretty cool but I'm always a little disappointed when I get to the intersection of the two loops since I know I'll be eventually be back. In this case two loops aren't better than one.

One way to make loop trails EVEN BETTER is to alternate travel from day to day. That way riders can experience the trail from both directions without having to worry about encountering oncoming traffic.

There's just something about the sense of accomplishment you get from riding a mountain bike trail loop that other trail configurations can't match. Trail builders take note!
  1
Hannah Nordhaus wrote <a href="http://www.rockymountainnews.com/drmn/other_recreation/article/0,2777,DRMN_23950_5700563,00.html">an article</a> for the Rocky Mountain News website a couple days ago about the new paved bike loop in Leadville, CO where she waxed poetically about the virtues of loop trails. I've been obsessed with loops almost since I began mountain biking and I think it's for many of the reasons Hannah mentions.

Mountain bike trail networks are unsatisfying to me because you can almost never ride every inch of trail without doing some planning and/or backtracking. Multiple loops are okay in my mind since it's a bit easier to string them together but networks with cut-throughs and spider-web patterns just aren't as fun for some reason. And forget about trying to map a network trail - it's tough no matter how you choose to attack it.

Ditto for out-and-back trails, though the Rocky Mountain News article already covers the reasons these trails don't satisfy. Why backtrack when you can see new stuff?

Lollipop loops are often necessary and I guess these don't bother me as long as the "stick" isn't too long. The stick is just an annoying out and back section so it's not surprising that lollipops aren't as fun as loops.

Figure 8 trails are pretty cool but I'm always a little disappointed when I get to the intersection of the two loops since I know I'll be eventually be back. In this case two loops aren't better than one.

One way to make loop trails EVEN BETTER is to alternate travel from day to day. That way riders can experience the trail from both directions without having to worry about encountering oncoming traffic.

There's just something about the sense of accomplishment you get from riding a mountain bike trail loop that other trail configurations can't match. Trail builders take note!
A person wearing a cycling helmet and sunglasses sits on a mountain bike on a dirt trail surrounded by lush greenery. Another mountain bike is parked nearby, and a bike saddle hangs from a tree branch in the background.
Hannah Nordhaus wrote <a href="http://www.rockymountainnews.com/drmn/other_recreation/article/0,2777,DRMN_23950_5700563,00.html">an article</a> for the Rocky Mountain News website a couple days ago about the new paved bike loop in Leadville, CO where she waxed poetically about the virtues of loop trails. I've been obsessed with loops almost since I began mountain biking and I think it's for many of the reasons Hannah mentions.

Mountain bike trail networks are unsatisfying to me because you can almost never ride every inch of trail without doing some planning and/or backtracking. Multiple loops are okay in my mind since it's a bit easier to string them together but networks with cut-throughs and spider-web patterns just aren't as fun for some reason. And forget about trying to map a network trail - it's tough no matter how you choose to attack it.

Ditto for out-and-back trails, though the Rocky Mountain News article already covers the reasons these trails don't satisfy. Why backtrack when you can see new stuff?

Lollipop loops are often necessary and I guess these don't bother me as long as the "stick" isn't too long. The stick is just an annoying out and back section so it's not surprising that lollipops aren't as fun as loops.

Figure 8 trails are pretty cool but I'm always a little disappointed when I get to the intersection of the two loops since I know I'll be eventually be back. In this case two loops aren't better than one.

One way to make loop trails EVEN BETTER is to alternate travel from day to day. That way riders can experience the trail from both directions without having to worry about encountering oncoming traffic.

There's just something about the sense of accomplishment you get from riding a mountain bike trail loop that other trail configurations can't match. Trail builders take note!
Hannah Nordhaus wrote <a href="http://www.rockymountainnews.com/drmn/other_recreation/article/0,2777,DRMN_23950_5700563,00.html">an article</a> for the Rocky Mountain News website a couple days ago about the new paved bike loop in Leadville, CO where she waxed poetically about the virtues of loop trails. I've been obsessed with loops almost since I began mountain biking and I think it's for many of the reasons Hannah mentions.

Mountain bike trail networks are unsatisfying to me because you can almost never ride every inch of trail without doing some planning and/or backtracking. Multiple loops are okay in my mind since it's a bit easier to string them together but networks with cut-throughs and spider-web patterns just aren't as fun for some reason. And forget about trying to map a network trail - it's tough no matter how you choose to attack it.

Ditto for out-and-back trails, though the Rocky Mountain News article already covers the reasons these trails don't satisfy. Why backtrack when you can see new stuff?

Lollipop loops are often necessary and I guess these don't bother me as long as the "stick" isn't too long. The stick is just an annoying out and back section so it's not surprising that lollipops aren't as fun as loops.

Figure 8 trails are pretty cool but I'm always a little disappointed when I get to the intersection of the two loops since I know I'll be eventually be back. In this case two loops aren't better than one.

One way to make loop trails EVEN BETTER is to alternate travel from day to day. That way riders can experience the trail from both directions without having to worry about encountering oncoming traffic.

There's just something about the sense of accomplishment you get from riding a mountain bike trail loop that other trail configurations can't match. Trail builders take note!
  1
Hannah Nordhaus wrote <a href="http://www.rockymountainnews.com/drmn/other_recreation/article/0,2777,DRMN_23950_5700563,00.html">an article</a> for the Rocky Mountain News website a couple days ago about the new paved bike loop in Leadville, CO where she waxed poetically about the virtues of loop trails. I've been obsessed with loops almost since I began mountain biking and I think it's for many of the reasons Hannah mentions.

Mountain bike trail networks are unsatisfying to me because you can almost never ride every inch of trail without doing some planning and/or backtracking. Multiple loops are okay in my mind since it's a bit easier to string them together but networks with cut-throughs and spider-web patterns just aren't as fun for some reason. And forget about trying to map a network trail - it's tough no matter how you choose to attack it.

Ditto for out-and-back trails, though the Rocky Mountain News article already covers the reasons these trails don't satisfy. Why backtrack when you can see new stuff?

Lollipop loops are often necessary and I guess these don't bother me as long as the "stick" isn't too long. The stick is just an annoying out and back section so it's not surprising that lollipops aren't as fun as loops.

Figure 8 trails are pretty cool but I'm always a little disappointed when I get to the intersection of the two loops since I know I'll be eventually be back. In this case two loops aren't better than one.

One way to make loop trails EVEN BETTER is to alternate travel from day to day. That way riders can experience the trail from both directions without having to worry about encountering oncoming traffic.

There's just something about the sense of accomplishment you get from riding a mountain bike trail loop that other trail configurations can't match. Trail builders take note!
A rocky landscape featuring a smooth granite surface with patches of green vegetation around the edges. In the foreground, a large log is positioned on the rock, and a faint path winds across the terrain leading into the background, where lush trees are visible. Overcast skies create a soft, muted light in the scene.
  1
Hannah Nordhaus wrote <a href="http://www.rockymountainnews.com/drmn/other_recreation/article/0,2777,DRMN_23950_5700563,00.html">an article</a> for the Rocky Mountain News website a couple days ago about the new paved bike loop in Leadville, CO where she waxed poetically about the virtues of loop trails. I've been obsessed with loops almost since I began mountain biking and I think it's for many of the reasons Hannah mentions.

Mountain bike trail networks are unsatisfying to me because you can almost never ride every inch of trail without doing some planning and/or backtracking. Multiple loops are okay in my mind since it's a bit easier to string them together but networks with cut-throughs and spider-web patterns just aren't as fun for some reason. And forget about trying to map a network trail - it's tough no matter how you choose to attack it.

Ditto for out-and-back trails, though the Rocky Mountain News article already covers the reasons these trails don't satisfy. Why backtrack when you can see new stuff?

Lollipop loops are often necessary and I guess these don't bother me as long as the "stick" isn't too long. The stick is just an annoying out and back section so it's not surprising that lollipops aren't as fun as loops.

Figure 8 trails are pretty cool but I'm always a little disappointed when I get to the intersection of the two loops since I know I'll be eventually be back. In this case two loops aren't better than one.

One way to make loop trails EVEN BETTER is to alternate travel from day to day. That way riders can experience the trail from both directions without having to worry about encountering oncoming traffic.

There's just something about the sense of accomplishment you get from riding a mountain bike trail loop that other trail configurations can't match. Trail builders take note!
Hannah Nordhaus wrote <a href="http://www.rockymountainnews.com/drmn/other_recreation/article/0,2777,DRMN_23950_5700563,00.html">an article</a> for the Rocky Mountain News website a couple days ago about the new paved bike loop in Leadville, CO where she waxed poetically about the virtues of loop trails. I've been obsessed with loops almost since I began mountain biking and I think it's for many of the reasons Hannah mentions.

Mountain bike trail networks are unsatisfying to me because you can almost never ride every inch of trail without doing some planning and/or backtracking. Multiple loops are okay in my mind since it's a bit easier to string them together but networks with cut-throughs and spider-web patterns just aren't as fun for some reason. And forget about trying to map a network trail - it's tough no matter how you choose to attack it.

Ditto for out-and-back trails, though the Rocky Mountain News article already covers the reasons these trails don't satisfy. Why backtrack when you can see new stuff?

Lollipop loops are often necessary and I guess these don't bother me as long as the "stick" isn't too long. The stick is just an annoying out and back section so it's not surprising that lollipops aren't as fun as loops.

Figure 8 trails are pretty cool but I'm always a little disappointed when I get to the intersection of the two loops since I know I'll be eventually be back. In this case two loops aren't better than one.

One way to make loop trails EVEN BETTER is to alternate travel from day to day. That way riders can experience the trail from both directions without having to worry about encountering oncoming traffic.

There's just something about the sense of accomplishment you get from riding a mountain bike trail loop that other trail configurations can't match. Trail builders take note!
Hannah Nordhaus wrote <a href="http://www.rockymountainnews.com/drmn/other_recreation/article/0,2777,DRMN_23950_5700563,00.html">an article</a> for the Rocky Mountain News website a couple days ago about the new paved bike loop in Leadville, CO where she waxed poetically about the virtues of loop trails. I've been obsessed with loops almost since I began mountain biking and I think it's for many of the reasons Hannah mentions.

Mountain bike trail networks are unsatisfying to me because you can almost never ride every inch of trail without doing some planning and/or backtracking. Multiple loops are okay in my mind since it's a bit easier to string them together but networks with cut-throughs and spider-web patterns just aren't as fun for some reason. And forget about trying to map a network trail - it's tough no matter how you choose to attack it.

Ditto for out-and-back trails, though the Rocky Mountain News article already covers the reasons these trails don't satisfy. Why backtrack when you can see new stuff?

Lollipop loops are often necessary and I guess these don't bother me as long as the "stick" isn't too long. The stick is just an annoying out and back section so it's not surprising that lollipops aren't as fun as loops.

Figure 8 trails are pretty cool but I'm always a little disappointed when I get to the intersection of the two loops since I know I'll be eventually be back. In this case two loops aren't better than one.

One way to make loop trails EVEN BETTER is to alternate travel from day to day. That way riders can experience the trail from both directions without having to worry about encountering oncoming traffic.

There's just something about the sense of accomplishment you get from riding a mountain bike trail loop that other trail configurations can't match. Trail builders take note!
Hannah Nordhaus wrote <a href="http://www.rockymountainnews.com/drmn/other_recreation/article/0,2777,DRMN_23950_5700563,00.html">an article</a> for the Rocky Mountain News website a couple days ago about the new paved bike loop in Leadville, CO where she waxed poetically about the virtues of loop trails. I've been obsessed with loops almost since I began mountain biking and I think it's for many of the reasons Hannah mentions.

Mountain bike trail networks are unsatisfying to me because you can almost never ride every inch of trail without doing some planning and/or backtracking. Multiple loops are okay in my mind since it's a bit easier to string them together but networks with cut-throughs and spider-web patterns just aren't as fun for some reason. And forget about trying to map a network trail - it's tough no matter how you choose to attack it.

Ditto for out-and-back trails, though the Rocky Mountain News article already covers the reasons these trails don't satisfy. Why backtrack when you can see new stuff?

Lollipop loops are often necessary and I guess these don't bother me as long as the "stick" isn't too long. The stick is just an annoying out and back section so it's not surprising that lollipops aren't as fun as loops.

Figure 8 trails are pretty cool but I'm always a little disappointed when I get to the intersection of the two loops since I know I'll be eventually be back. In this case two loops aren't better than one.

One way to make loop trails EVEN BETTER is to alternate travel from day to day. That way riders can experience the trail from both directions without having to worry about encountering oncoming traffic.

There's just something about the sense of accomplishment you get from riding a mountain bike trail loop that other trail configurations can't match. Trail builders take note!
  3
Hannah Nordhaus wrote <a href="http://www.rockymountainnews.com/drmn/other_recreation/article/0,2777,DRMN_23950_5700563,00.html">an article</a> for the Rocky Mountain News website a couple days ago about the new paved bike loop in Leadville, CO where she waxed poetically about the virtues of loop trails. I've been obsessed with loops almost since I began mountain biking and I think it's for many of the reasons Hannah mentions.

Mountain bike trail networks are unsatisfying to me because you can almost never ride every inch of trail without doing some planning and/or backtracking. Multiple loops are okay in my mind since it's a bit easier to string them together but networks with cut-throughs and spider-web patterns just aren't as fun for some reason. And forget about trying to map a network trail - it's tough no matter how you choose to attack it.

Ditto for out-and-back trails, though the Rocky Mountain News article already covers the reasons these trails don't satisfy. Why backtrack when you can see new stuff?

Lollipop loops are often necessary and I guess these don't bother me as long as the "stick" isn't too long. The stick is just an annoying out and back section so it's not surprising that lollipops aren't as fun as loops.

Figure 8 trails are pretty cool but I'm always a little disappointed when I get to the intersection of the two loops since I know I'll be eventually be back. In this case two loops aren't better than one.

One way to make loop trails EVEN BETTER is to alternate travel from day to day. That way riders can experience the trail from both directions without having to worry about encountering oncoming traffic.

There's just something about the sense of accomplishment you get from riding a mountain bike trail loop that other trail configurations can't match. Trail builders take note!
  1
Hannah Nordhaus wrote <a href="http://www.rockymountainnews.com/drmn/other_recreation/article/0,2777,DRMN_23950_5700563,00.html">an article</a> for the Rocky Mountain News website a couple days ago about the new paved bike loop in Leadville, CO where she waxed poetically about the virtues of loop trails. I've been obsessed with loops almost since I began mountain biking and I think it's for many of the reasons Hannah mentions.

Mountain bike trail networks are unsatisfying to me because you can almost never ride every inch of trail without doing some planning and/or backtracking. Multiple loops are okay in my mind since it's a bit easier to string them together but networks with cut-throughs and spider-web patterns just aren't as fun for some reason. And forget about trying to map a network trail - it's tough no matter how you choose to attack it.

Ditto for out-and-back trails, though the Rocky Mountain News article already covers the reasons these trails don't satisfy. Why backtrack when you can see new stuff?

Lollipop loops are often necessary and I guess these don't bother me as long as the "stick" isn't too long. The stick is just an annoying out and back section so it's not surprising that lollipops aren't as fun as loops.

Figure 8 trails are pretty cool but I'm always a little disappointed when I get to the intersection of the two loops since I know I'll be eventually be back. In this case two loops aren't better than one.

One way to make loop trails EVEN BETTER is to alternate travel from day to day. That way riders can experience the trail from both directions without having to worry about encountering oncoming traffic.

There's just something about the sense of accomplishment you get from riding a mountain bike trail loop that other trail configurations can't match. Trail builders take note!
Hannah Nordhaus wrote <a href="http://www.rockymountainnews.com/drmn/other_recreation/article/0,2777,DRMN_23950_5700563,00.html">an article</a> for the Rocky Mountain News website a couple days ago about the new paved bike loop in Leadville, CO where she waxed poetically about the virtues of loop trails. I've been obsessed with loops almost since I began mountain biking and I think it's for many of the reasons Hannah mentions.

Mountain bike trail networks are unsatisfying to me because you can almost never ride every inch of trail without doing some planning and/or backtracking. Multiple loops are okay in my mind since it's a bit easier to string them together but networks with cut-throughs and spider-web patterns just aren't as fun for some reason. And forget about trying to map a network trail - it's tough no matter how you choose to attack it.

Ditto for out-and-back trails, though the Rocky Mountain News article already covers the reasons these trails don't satisfy. Why backtrack when you can see new stuff?

Lollipop loops are often necessary and I guess these don't bother me as long as the "stick" isn't too long. The stick is just an annoying out and back section so it's not surprising that lollipops aren't as fun as loops.

Figure 8 trails are pretty cool but I'm always a little disappointed when I get to the intersection of the two loops since I know I'll be eventually be back. In this case two loops aren't better than one.

One way to make loop trails EVEN BETTER is to alternate travel from day to day. That way riders can experience the trail from both directions without having to worry about encountering oncoming traffic.

There's just something about the sense of accomplishment you get from riding a mountain bike trail loop that other trail configurations can't match. Trail builders take note!
Hannah Nordhaus wrote <a href="http://www.rockymountainnews.com/drmn/other_recreation/article/0,2777,DRMN_23950_5700563,00.html">an article</a> for the Rocky Mountain News website a couple days ago about the new paved bike loop in Leadville, CO where she waxed poetically about the virtues of loop trails. I've been obsessed with loops almost since I began mountain biking and I think it's for many of the reasons Hannah mentions.

Mountain bike trail networks are unsatisfying to me because you can almost never ride every inch of trail without doing some planning and/or backtracking. Multiple loops are okay in my mind since it's a bit easier to string them together but networks with cut-throughs and spider-web patterns just aren't as fun for some reason. And forget about trying to map a network trail - it's tough no matter how you choose to attack it.

Ditto for out-and-back trails, though the Rocky Mountain News article already covers the reasons these trails don't satisfy. Why backtrack when you can see new stuff?

Lollipop loops are often necessary and I guess these don't bother me as long as the "stick" isn't too long. The stick is just an annoying out and back section so it's not surprising that lollipops aren't as fun as loops.

Figure 8 trails are pretty cool but I'm always a little disappointed when I get to the intersection of the two loops since I know I'll be eventually be back. In this case two loops aren't better than one.

One way to make loop trails EVEN BETTER is to alternate travel from day to day. That way riders can experience the trail from both directions without having to worry about encountering oncoming traffic.

There's just something about the sense of accomplishment you get from riding a mountain bike trail loop that other trail configurations can't match. Trail builders take note!
  1
Hannah Nordhaus wrote <a href="http://www.rockymountainnews.com/drmn/other_recreation/article/0,2777,DRMN_23950_5700563,00.html">an article</a> for the Rocky Mountain News website a couple days ago about the new paved bike loop in Leadville, CO where she waxed poetically about the virtues of loop trails. I've been obsessed with loops almost since I began mountain biking and I think it's for many of the reasons Hannah mentions.

Mountain bike trail networks are unsatisfying to me because you can almost never ride every inch of trail without doing some planning and/or backtracking. Multiple loops are okay in my mind since it's a bit easier to string them together but networks with cut-throughs and spider-web patterns just aren't as fun for some reason. And forget about trying to map a network trail - it's tough no matter how you choose to attack it.

Ditto for out-and-back trails, though the Rocky Mountain News article already covers the reasons these trails don't satisfy. Why backtrack when you can see new stuff?

Lollipop loops are often necessary and I guess these don't bother me as long as the "stick" isn't too long. The stick is just an annoying out and back section so it's not surprising that lollipops aren't as fun as loops.

Figure 8 trails are pretty cool but I'm always a little disappointed when I get to the intersection of the two loops since I know I'll be eventually be back. In this case two loops aren't better than one.

One way to make loop trails EVEN BETTER is to alternate travel from day to day. That way riders can experience the trail from both directions without having to worry about encountering oncoming traffic.

There's just something about the sense of accomplishment you get from riding a mountain bike trail loop that other trail configurations can't match. Trail builders take note!
  1
Hannah Nordhaus wrote <a href="http://www.rockymountainnews.com/drmn/other_recreation/article/0,2777,DRMN_23950_5700563,00.html">an article</a> for the Rocky Mountain News website a couple days ago about the new paved bike loop in Leadville, CO where she waxed poetically about the virtues of loop trails. I've been obsessed with loops almost since I began mountain biking and I think it's for many of the reasons Hannah mentions.

Mountain bike trail networks are unsatisfying to me because you can almost never ride every inch of trail without doing some planning and/or backtracking. Multiple loops are okay in my mind since it's a bit easier to string them together but networks with cut-throughs and spider-web patterns just aren't as fun for some reason. And forget about trying to map a network trail - it's tough no matter how you choose to attack it.

Ditto for out-and-back trails, though the Rocky Mountain News article already covers the reasons these trails don't satisfy. Why backtrack when you can see new stuff?

Lollipop loops are often necessary and I guess these don't bother me as long as the "stick" isn't too long. The stick is just an annoying out and back section so it's not surprising that lollipops aren't as fun as loops.

Figure 8 trails are pretty cool but I'm always a little disappointed when I get to the intersection of the two loops since I know I'll be eventually be back. In this case two loops aren't better than one.

One way to make loop trails EVEN BETTER is to alternate travel from day to day. That way riders can experience the trail from both directions without having to worry about encountering oncoming traffic.

There's just something about the sense of accomplishment you get from riding a mountain bike trail loop that other trail configurations can't match. Trail builders take note!
  1
A black and blue CamelBak backpack designed for outdoor activities, featuring a hydration reservoir and a drinking tube, padded shoulder straps, and multiple compartments for gear storage.
  1
Hannah Nordhaus wrote <a href="http://www.rockymountainnews.com/drmn/other_recreation/article/0,2777,DRMN_23950_5700563,00.html">an article</a> for the Rocky Mountain News website a couple days ago about the new paved bike loop in Leadville, CO where she waxed poetically about the virtues of loop trails. I've been obsessed with loops almost since I began mountain biking and I think it's for many of the reasons Hannah mentions.

Mountain bike trail networks are unsatisfying to me because you can almost never ride every inch of trail without doing some planning and/or backtracking. Multiple loops are okay in my mind since it's a bit easier to string them together but networks with cut-throughs and spider-web patterns just aren't as fun for some reason. And forget about trying to map a network trail - it's tough no matter how you choose to attack it.

Ditto for out-and-back trails, though the Rocky Mountain News article already covers the reasons these trails don't satisfy. Why backtrack when you can see new stuff?

Lollipop loops are often necessary and I guess these don't bother me as long as the "stick" isn't too long. The stick is just an annoying out and back section so it's not surprising that lollipops aren't as fun as loops.

Figure 8 trails are pretty cool but I'm always a little disappointed when I get to the intersection of the two loops since I know I'll be eventually be back. In this case two loops aren't better than one.

One way to make loop trails EVEN BETTER is to alternate travel from day to day. That way riders can experience the trail from both directions without having to worry about encountering oncoming traffic.

There's just something about the sense of accomplishment you get from riding a mountain bike trail loop that other trail configurations can't match. Trail builders take note!
Hannah Nordhaus wrote <a href="http://www.rockymountainnews.com/drmn/other_recreation/article/0,2777,DRMN_23950_5700563,00.html">an article</a> for the Rocky Mountain News website a couple days ago about the new paved bike loop in Leadville, CO where she waxed poetically about the virtues of loop trails. I've been obsessed with loops almost since I began mountain biking and I think it's for many of the reasons Hannah mentions.

Mountain bike trail networks are unsatisfying to me because you can almost never ride every inch of trail without doing some planning and/or backtracking. Multiple loops are okay in my mind since it's a bit easier to string them together but networks with cut-throughs and spider-web patterns just aren't as fun for some reason. And forget about trying to map a network trail - it's tough no matter how you choose to attack it.

Ditto for out-and-back trails, though the Rocky Mountain News article already covers the reasons these trails don't satisfy. Why backtrack when you can see new stuff?

Lollipop loops are often necessary and I guess these don't bother me as long as the "stick" isn't too long. The stick is just an annoying out and back section so it's not surprising that lollipops aren't as fun as loops.

Figure 8 trails are pretty cool but I'm always a little disappointed when I get to the intersection of the two loops since I know I'll be eventually be back. In this case two loops aren't better than one.

One way to make loop trails EVEN BETTER is to alternate travel from day to day. That way riders can experience the trail from both directions without having to worry about encountering oncoming traffic.

There's just something about the sense of accomplishment you get from riding a mountain bike trail loop that other trail configurations can't match. Trail builders take note!
  4
A motorcyclist performing a jump over a muddy water puddle in a snowy forest setting, surrounded by tall pine trees.
  1
A smiling man wearing a colorful floral shirt and a blue bucket hat stands with his arms crossed on a dirt path. He is surrounded by a scenic landscape with rolling hills and clear blue skies in the background.
Map of the Colorado Trail highlighting the route of the first mountain bike race, starting in Denver and finishing in Durango. The map indicates several wilderness areas along the 535-mile route, including the Holy Cross, Mount Massive, Collegiate Peaks, Lost Creek, La Garita, and Weminuche Wilderness.
  1
Hannah Nordhaus wrote <a href="http://www.rockymountainnews.com/drmn/other_recreation/article/0,2777,DRMN_23950_5700563,00.html">an article</a> for the Rocky Mountain News website a couple days ago about the new paved bike loop in Leadville, CO where she waxed poetically about the virtues of loop trails. I've been obsessed with loops almost since I began mountain biking and I think it's for many of the reasons Hannah mentions.

Mountain bike trail networks are unsatisfying to me because you can almost never ride every inch of trail without doing some planning and/or backtracking. Multiple loops are okay in my mind since it's a bit easier to string them together but networks with cut-throughs and spider-web patterns just aren't as fun for some reason. And forget about trying to map a network trail - it's tough no matter how you choose to attack it.

Ditto for out-and-back trails, though the Rocky Mountain News article already covers the reasons these trails don't satisfy. Why backtrack when you can see new stuff?

Lollipop loops are often necessary and I guess these don't bother me as long as the "stick" isn't too long. The stick is just an annoying out and back section so it's not surprising that lollipops aren't as fun as loops.

Figure 8 trails are pretty cool but I'm always a little disappointed when I get to the intersection of the two loops since I know I'll be eventually be back. In this case two loops aren't better than one.

One way to make loop trails EVEN BETTER is to alternate travel from day to day. That way riders can experience the trail from both directions without having to worry about encountering oncoming traffic.

There's just something about the sense of accomplishment you get from riding a mountain bike trail loop that other trail configurations can't match. Trail builders take note!
Hannah Nordhaus wrote <a href="http://www.rockymountainnews.com/drmn/other_recreation/article/0,2777,DRMN_23950_5700563,00.html">an article</a> for the Rocky Mountain News website a couple days ago about the new paved bike loop in Leadville, CO where she waxed poetically about the virtues of loop trails. I've been obsessed with loops almost since I began mountain biking and I think it's for many of the reasons Hannah mentions.

Mountain bike trail networks are unsatisfying to me because you can almost never ride every inch of trail without doing some planning and/or backtracking. Multiple loops are okay in my mind since it's a bit easier to string them together but networks with cut-throughs and spider-web patterns just aren't as fun for some reason. And forget about trying to map a network trail - it's tough no matter how you choose to attack it.

Ditto for out-and-back trails, though the Rocky Mountain News article already covers the reasons these trails don't satisfy. Why backtrack when you can see new stuff?

Lollipop loops are often necessary and I guess these don't bother me as long as the "stick" isn't too long. The stick is just an annoying out and back section so it's not surprising that lollipops aren't as fun as loops.

Figure 8 trails are pretty cool but I'm always a little disappointed when I get to the intersection of the two loops since I know I'll be eventually be back. In this case two loops aren't better than one.

One way to make loop trails EVEN BETTER is to alternate travel from day to day. That way riders can experience the trail from both directions without having to worry about encountering oncoming traffic.

There's just something about the sense of accomplishment you get from riding a mountain bike trail loop that other trail configurations can't match. Trail builders take note!
A group of cyclists racing along a roadside, with onlookers in the background taking photos. The cyclists are wearing colorful racing jerseys and helmets, and there are cars parked alongside the road. The backdrop features a rocky hillside and trees.
  1
Hannah Nordhaus wrote <a href="http://www.rockymountainnews.com/drmn/other_recreation/article/0,2777,DRMN_23950_5700563,00.html">an article</a> for the Rocky Mountain News website a couple days ago about the new paved bike loop in Leadville, CO where she waxed poetically about the virtues of loop trails. I've been obsessed with loops almost since I began mountain biking and I think it's for many of the reasons Hannah mentions.

Mountain bike trail networks are unsatisfying to me because you can almost never ride every inch of trail without doing some planning and/or backtracking. Multiple loops are okay in my mind since it's a bit easier to string them together but networks with cut-throughs and spider-web patterns just aren't as fun for some reason. And forget about trying to map a network trail - it's tough no matter how you choose to attack it.

Ditto for out-and-back trails, though the Rocky Mountain News article already covers the reasons these trails don't satisfy. Why backtrack when you can see new stuff?

Lollipop loops are often necessary and I guess these don't bother me as long as the "stick" isn't too long. The stick is just an annoying out and back section so it's not surprising that lollipops aren't as fun as loops.

Figure 8 trails are pretty cool but I'm always a little disappointed when I get to the intersection of the two loops since I know I'll be eventually be back. In this case two loops aren't better than one.

One way to make loop trails EVEN BETTER is to alternate travel from day to day. That way riders can experience the trail from both directions without having to worry about encountering oncoming traffic.

There's just something about the sense of accomplishment you get from riding a mountain bike trail loop that other trail configurations can't match. Trail builders take note!
Hannah Nordhaus wrote <a href="http://www.rockymountainnews.com/drmn/other_recreation/article/0,2777,DRMN_23950_5700563,00.html">an article</a> for the Rocky Mountain News website a couple days ago about the new paved bike loop in Leadville, CO where she waxed poetically about the virtues of loop trails. I've been obsessed with loops almost since I began mountain biking and I think it's for many of the reasons Hannah mentions.

Mountain bike trail networks are unsatisfying to me because you can almost never ride every inch of trail without doing some planning and/or backtracking. Multiple loops are okay in my mind since it's a bit easier to string them together but networks with cut-throughs and spider-web patterns just aren't as fun for some reason. And forget about trying to map a network trail - it's tough no matter how you choose to attack it.

Ditto for out-and-back trails, though the Rocky Mountain News article already covers the reasons these trails don't satisfy. Why backtrack when you can see new stuff?

Lollipop loops are often necessary and I guess these don't bother me as long as the "stick" isn't too long. The stick is just an annoying out and back section so it's not surprising that lollipops aren't as fun as loops.

Figure 8 trails are pretty cool but I'm always a little disappointed when I get to the intersection of the two loops since I know I'll be eventually be back. In this case two loops aren't better than one.

One way to make loop trails EVEN BETTER is to alternate travel from day to day. That way riders can experience the trail from both directions without having to worry about encountering oncoming traffic.

There's just something about the sense of accomplishment you get from riding a mountain bike trail loop that other trail configurations can't match. Trail builders take note!
Hannah Nordhaus wrote <a href="http://www.rockymountainnews.com/drmn/other_recreation/article/0,2777,DRMN_23950_5700563,00.html">an article</a> for the Rocky Mountain News website a couple days ago about the new paved bike loop in Leadville, CO where she waxed poetically about the virtues of loop trails. I've been obsessed with loops almost since I began mountain biking and I think it's for many of the reasons Hannah mentions.

Mountain bike trail networks are unsatisfying to me because you can almost never ride every inch of trail without doing some planning and/or backtracking. Multiple loops are okay in my mind since it's a bit easier to string them together but networks with cut-throughs and spider-web patterns just aren't as fun for some reason. And forget about trying to map a network trail - it's tough no matter how you choose to attack it.

Ditto for out-and-back trails, though the Rocky Mountain News article already covers the reasons these trails don't satisfy. Why backtrack when you can see new stuff?

Lollipop loops are often necessary and I guess these don't bother me as long as the "stick" isn't too long. The stick is just an annoying out and back section so it's not surprising that lollipops aren't as fun as loops.

Figure 8 trails are pretty cool but I'm always a little disappointed when I get to the intersection of the two loops since I know I'll be eventually be back. In this case two loops aren't better than one.

One way to make loop trails EVEN BETTER is to alternate travel from day to day. That way riders can experience the trail from both directions without having to worry about encountering oncoming traffic.

There's just something about the sense of accomplishment you get from riding a mountain bike trail loop that other trail configurations can't match. Trail builders take note!
Hannah Nordhaus wrote <a href="http://www.rockymountainnews.com/drmn/other_recreation/article/0,2777,DRMN_23950_5700563,00.html">an article</a> for the Rocky Mountain News website a couple days ago about the new paved bike loop in Leadville, CO where she waxed poetically about the virtues of loop trails. I've been obsessed with loops almost since I began mountain biking and I think it's for many of the reasons Hannah mentions.

Mountain bike trail networks are unsatisfying to me because you can almost never ride every inch of trail without doing some planning and/or backtracking. Multiple loops are okay in my mind since it's a bit easier to string them together but networks with cut-throughs and spider-web patterns just aren't as fun for some reason. And forget about trying to map a network trail - it's tough no matter how you choose to attack it.

Ditto for out-and-back trails, though the Rocky Mountain News article already covers the reasons these trails don't satisfy. Why backtrack when you can see new stuff?

Lollipop loops are often necessary and I guess these don't bother me as long as the "stick" isn't too long. The stick is just an annoying out and back section so it's not surprising that lollipops aren't as fun as loops.

Figure 8 trails are pretty cool but I'm always a little disappointed when I get to the intersection of the two loops since I know I'll be eventually be back. In this case two loops aren't better than one.

One way to make loop trails EVEN BETTER is to alternate travel from day to day. That way riders can experience the trail from both directions without having to worry about encountering oncoming traffic.

There's just something about the sense of accomplishment you get from riding a mountain bike trail loop that other trail configurations can't match. Trail builders take note!
  1
A winding dirt path through a lush green meadow, surrounded by mountains under a bright blue sky with scattered clouds.
  2
Hannah Nordhaus wrote <a href="http://www.rockymountainnews.com/drmn/other_recreation/article/0,2777,DRMN_23950_5700563,00.html">an article</a> for the Rocky Mountain News website a couple days ago about the new paved bike loop in Leadville, CO where she waxed poetically about the virtues of loop trails. I've been obsessed with loops almost since I began mountain biking and I think it's for many of the reasons Hannah mentions.

Mountain bike trail networks are unsatisfying to me because you can almost never ride every inch of trail without doing some planning and/or backtracking. Multiple loops are okay in my mind since it's a bit easier to string them together but networks with cut-throughs and spider-web patterns just aren't as fun for some reason. And forget about trying to map a network trail - it's tough no matter how you choose to attack it.

Ditto for out-and-back trails, though the Rocky Mountain News article already covers the reasons these trails don't satisfy. Why backtrack when you can see new stuff?

Lollipop loops are often necessary and I guess these don't bother me as long as the "stick" isn't too long. The stick is just an annoying out and back section so it's not surprising that lollipops aren't as fun as loops.

Figure 8 trails are pretty cool but I'm always a little disappointed when I get to the intersection of the two loops since I know I'll be eventually be back. In this case two loops aren't better than one.

One way to make loop trails EVEN BETTER is to alternate travel from day to day. That way riders can experience the trail from both directions without having to worry about encountering oncoming traffic.

There's just something about the sense of accomplishment you get from riding a mountain bike trail loop that other trail configurations can't match. Trail builders take note!
  1
Hannah Nordhaus wrote <a href="http://www.rockymountainnews.com/drmn/other_recreation/article/0,2777,DRMN_23950_5700563,00.html">an article</a> for the Rocky Mountain News website a couple days ago about the new paved bike loop in Leadville, CO where she waxed poetically about the virtues of loop trails. I've been obsessed with loops almost since I began mountain biking and I think it's for many of the reasons Hannah mentions.

Mountain bike trail networks are unsatisfying to me because you can almost never ride every inch of trail without doing some planning and/or backtracking. Multiple loops are okay in my mind since it's a bit easier to string them together but networks with cut-throughs and spider-web patterns just aren't as fun for some reason. And forget about trying to map a network trail - it's tough no matter how you choose to attack it.

Ditto for out-and-back trails, though the Rocky Mountain News article already covers the reasons these trails don't satisfy. Why backtrack when you can see new stuff?

Lollipop loops are often necessary and I guess these don't bother me as long as the "stick" isn't too long. The stick is just an annoying out and back section so it's not surprising that lollipops aren't as fun as loops.

Figure 8 trails are pretty cool but I'm always a little disappointed when I get to the intersection of the two loops since I know I'll be eventually be back. In this case two loops aren't better than one.

One way to make loop trails EVEN BETTER is to alternate travel from day to day. That way riders can experience the trail from both directions without having to worry about encountering oncoming traffic.

There's just something about the sense of accomplishment you get from riding a mountain bike trail loop that other trail configurations can't match. Trail builders take note!
  2
A narrow dirt path surrounded by lush green trees, leading through a wooded area. The sunlight filters through the foliage, creating a serene and tranquil atmosphere.
  4
Hannah Nordhaus wrote <a href="http://www.rockymountainnews.com/drmn/other_recreation/article/0,2777,DRMN_23950_5700563,00.html">an article</a> for the Rocky Mountain News website a couple days ago about the new paved bike loop in Leadville, CO where she waxed poetically about the virtues of loop trails. I've been obsessed with loops almost since I began mountain biking and I think it's for many of the reasons Hannah mentions.

Mountain bike trail networks are unsatisfying to me because you can almost never ride every inch of trail without doing some planning and/or backtracking. Multiple loops are okay in my mind since it's a bit easier to string them together but networks with cut-throughs and spider-web patterns just aren't as fun for some reason. And forget about trying to map a network trail - it's tough no matter how you choose to attack it.

Ditto for out-and-back trails, though the Rocky Mountain News article already covers the reasons these trails don't satisfy. Why backtrack when you can see new stuff?

Lollipop loops are often necessary and I guess these don't bother me as long as the "stick" isn't too long. The stick is just an annoying out and back section so it's not surprising that lollipops aren't as fun as loops.

Figure 8 trails are pretty cool but I'm always a little disappointed when I get to the intersection of the two loops since I know I'll be eventually be back. In this case two loops aren't better than one.

One way to make loop trails EVEN BETTER is to alternate travel from day to day. That way riders can experience the trail from both directions without having to worry about encountering oncoming traffic.

There's just something about the sense of accomplishment you get from riding a mountain bike trail loop that other trail configurations can't match. Trail builders take note!
  2
A narrow dirt path winding through a lush green forest, surrounded by tall trees and dappled sunlight filtering through the leaves. The ground is covered with fallen leaves and small rocks, creating a natural, serene atmosphere.
  1
Hannah Nordhaus wrote <a href="http://www.rockymountainnews.com/drmn/other_recreation/article/0,2777,DRMN_23950_5700563,00.html">an article</a> for the Rocky Mountain News website a couple days ago about the new paved bike loop in Leadville, CO where she waxed poetically about the virtues of loop trails. I've been obsessed with loops almost since I began mountain biking and I think it's for many of the reasons Hannah mentions.

Mountain bike trail networks are unsatisfying to me because you can almost never ride every inch of trail without doing some planning and/or backtracking. Multiple loops are okay in my mind since it's a bit easier to string them together but networks with cut-throughs and spider-web patterns just aren't as fun for some reason. And forget about trying to map a network trail - it's tough no matter how you choose to attack it.

Ditto for out-and-back trails, though the Rocky Mountain News article already covers the reasons these trails don't satisfy. Why backtrack when you can see new stuff?

Lollipop loops are often necessary and I guess these don't bother me as long as the "stick" isn't too long. The stick is just an annoying out and back section so it's not surprising that lollipops aren't as fun as loops.

Figure 8 trails are pretty cool but I'm always a little disappointed when I get to the intersection of the two loops since I know I'll be eventually be back. In this case two loops aren't better than one.

One way to make loop trails EVEN BETTER is to alternate travel from day to day. That way riders can experience the trail from both directions without having to worry about encountering oncoming traffic.

There's just something about the sense of accomplishment you get from riding a mountain bike trail loop that other trail configurations can't match. Trail builders take note!
  1