[ttreat]

The brakes were soft because I replaced the internal piston with an aftermarket one the didn’t seal as well.  When I would squeeze the lever fluid would leak past the seals on the piston.  I thought I had a problem with the piston but I didn’t.  Everything works now that I fixed the Stealthamajig and out in a OEM lever piston.

[ttreat]

This was a comedy of errors but I got the problem solved.  It all goes back to me putting the Stealthamajig on incorrectly.  I was told the olive just screws on the end of the barb.  The olive needs to go over the hose and then screw into the barb.  This allows the barb end to protrude into the lever housing and push back the fitting on the end of the spring.

 

 

[Author]

Posts