[Bike Walkers]

Thanks for everything.. Loads of useful info!! I came across the PNW Ridge Dropper 30.9mm/125mm. I measured the seat tube length on my bike til my waterbottle holder screws stopped the tape measure… came out to 231.14mm/9inches. The Ridge has a full insertion of 235mm/9.25inches which leaves me about a 1/4 of an inch plus the dropper collar at its lowest insertion? Did that make sense? Hope im not confusing anyone… Thanks again for all the great help!!

[Bike Walkers]

What are some choices for a reliable and reasonable priced internal droppers?

[Bike Walkers]

And yes… This is internal routing. Im looking to drop the seat as low as possible and not raise it soo high, so a 120mm would be the pick?

[Bike Walkers]

Thanks ZipHead, i havent got the first clue of how to install a dropper. Def taking it to the LBS.. My seat clamp is 34.9.. Do i still need the 30.9 you mentioned?

[Bike Walkers]

<p style=”text-align: left;”>Thanks for all your responses.. Im 5’10 and 150lbs. My bike is a size L. Heres the specs of my bike from the website… Ill def take a look at the PNC site, heard great things ab9ut them!</p>

[Author]

Posts