2_Salukis


0 points (view top contributors)
> Forum Activity
 

Forum Replies Created

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • in reply to: tubeless #126005

    No need for tubeless-specific wheels/rims. That’s what the rim strips are used for – to "mimic" how a tubeless rim is shaped on the inside.

    in reply to: tubeless #126003

    Did the videos answer all of your questions?

    in reply to: tubeless #126001

    The first thing I wish I had done is watch the Stan’s Tubeless videos. I set up some wheels before and after, and those I did after watching the soapy way of mounting definitely hold air longer. Their site will also answer most of your questions – there are a couple of options, from rim strips to rim tape, etc.

    in reply to: Would you help an injured mountain biker sue? #125581

    I would figure that if a man-made feature collapsed or was defective in a way to cause injury, you wouldn’t need a "trail builder" to explain it.

    I have metallic, but plan on switching the rear to organic as soon as I need to replace them. The squealing bugs me, so I want to see if organic will fix it. I tend to stick with the same brand, rather than go with 3rd-party. In my case, Avid Juicy Seven.

    You may want to check out this: [url:11yfpg63]http://www.singletracks.com/blog/mtb-gear/mountain-bike-brakes-buyers-guide/[/url:11yfpg63]

    in reply to: Opinions about a swap of bikes #93593

    Thanks for your comments.

    It was all for naught though. The guy sold it to someone else in the middle of our working out how to arrange the swap, and didn’t have the class (or courage) to let me know.

    in reply to: Cold as HE!! in Colorado #93094

    Wore some loose fitting "tights," base layer T-shirt, long sleeve jersey and a vest this morning. Started in the 40s, and it might have gotten into the 50s by the end. (IMO that’s not cold as he!! though.)

    in reply to: Clippers or no Clippers?? #75772
    "jkneivel" wrote

    I just clipped in today for the first time. I practiced (clipping in/clipping out) for a bit and then I rode around my neighborhood. I came to a stop and I forgot that I was clipped in. I fell in front of all my neighbors and we all had a good laugh

    Reminds me of when my son first tried clipless pedals. I had him try it in the yard, and yup, fell right over the first time he stopped. I laughed and he got mad, saying it wasn’t funny. I told him that almost everyone does that….once….and that’s why I had him start out on the lawn.

    in reply to: Trail Photo Contest Link #92572

    Anyone else sick of that kid spinning around in the Silverado commercial?

    in reply to: Wanted: Thomson Elite Stem 90 mm/5-15 deg/25.4 clamp #92234

    I’ve got one that was was planning to put on eBay eventually. I just changed to a a longer one. The only catch is that the used one that I got came with cracked stem inserts because someone over-torqued the bolts. So you could do what I did and just use the inserts you have now.

    I’m in C-Sprgs, but am going to a wedding this afternoon (10/3) at Red Rocks.

    90mm, 5 degree, 25.4mm clamp. Black. How’s $30? Or $35 to mail it? TElite at sauve dot net, or 7!9 three f1ve tw0 8382 for my cell. I’ll also shoot you a note at your email.

Viewing 10 posts - 1 through 10 (of 10 total)