Selling 2011 JAMIS 17" All Carbon Fiber Dakota DXC Pro 26er

[Richard_Q]

SPECIFICATIONS

Frame – High performance CARBON FIBER COMPOSITE with high modulus fibers, Dyad XC Plus lay-up, tri-oval top and down tubes with SST tubing diameters, 1.5 – 1 1/8” tapered head tube,
BB30 OS BB shell, asymmetrical chainstays, replaceable derailleur hanger.

Fork – Fox 32FRL, air spring, external rebound damping, lever-actuated lockout, F.I.T. damper, 32mm stanchions, tapered alloy steerer, 100mm travel.

Headset – FSA Orbit 1.5 Zero-Stack internal cup, for tapered head tube, 30mm shim stack.

Wheels – Mavic Crossride Disc wheel set, Center lock hubs.

Tires – Geax Gato 26 x 2.1” front and AKA 2.0” rear, folding.
*Upgraded to – Bontrager XR2 Tubeless Ready 26×2.10 Front & Rear.

Derailleurs – Shimano Deore XT M773 Shadow rear and XT M771 34.9mm top pull front.

Shiftlevers – Shimano Deore XT M770 Rapidfire Plus-SL, 10-speed.

Chain – KMC X10SL.

Cassette – Shimano HG81, 11-36, 10-speed.

Crankset – FSA Comet BB30, 42/32/24, 170mm (15”), 175mm (17-21”).

BB Set – FSA BB30 integrated.

Pedals – *Upgraded to – Crank Brothers Candy 3 Pedals Blue.

Brakeset – Shimano Deore XT M775 hydraulic disc brakes with 160mm Center lock rotors.

Handlebar – Ritchey Pro OS flat bar, 31.8 x 5º x 600mm.
*Upgraded to – FSA K-FORCE XC CARBON MTB, Width: 660mm, 8 degree back sweep,
3 degree upward bend, 18mm rise, Weight: 180 grams.

Stem – Ritchey Pro 4-Axis, 6º x 90mm (15”), 100mm (17”), 110mm (19”) & 120mm (21”).

Grips – Jamis Lock-On, dual density.
*Upgraded to –

Seat Post – Ritchey Pro OS, 31.6 x 400mm with alloy clamp and cromo seat pin.

Saddle – WTB Silverado team, NiCro tubular rails.

Sizes – 17”.

Color – Victory Blue/Pearl White.

FEATURES & BENEFITS

Dakota Pro’s carbon fiber frame features a Dyad XC Plus lay-up comprised of 2 types of
carbon fiber material to optimize ride quality and stiffness.

The SST differential tubing diameter design (larger diameters on larger frames, smaller
diameters on smaller frames) supports big riders without punishing smaller ones.

The larger bore diameter of the BB30 system improves ply compaction yielding a lighter
frame with increased frame strength.

With the maximum bending load at the front of a bike being found at the crown, a 1 1/8”-
1.5” tapered headtube strengthens and stiffens the frame, while helping to reduce weight
at the same time.

Fox’s 32 chassis features increased crown/stanchion overlap & Quad-tapered sliders to
reduce weight while optimizing strength & stiffness. A tapered steerer tube provides more
strength at the crown while still keeping the fork light.

Shimano’s Deore XT Shadow rear derailleur features a quiet super low-profile design that
won’t slap the chainstay in rough riding conditions. Direct cable routing reduces the risk of housing snag.

FSA’s Comet crank features BB30 oversized 30mm alloy spindles with bearings pressed
directly into the BB shell to offer weight savings up to 12%. An additional benefit vs
external bearing systems; the bearings are less exposed to the elements.

The Comet’s 42/32/24 crankset and Shimano’s 11-36 cassette supply 30 speeds and
a huge range of gear ratios to take on any terrain.

Shimano XT hydraulic disc brakes feature a forged Mono-body caliper that’s super
lightweight & rigid, a shim-less mounting system that makes set-up & adjustment a
snap and an opposed 2-piston brake design that provides instantaneous power. This
system utilizes mineral oil for hydraulic fluid which is non-corrosive and much more
environmentally friendly than standard DOT fluid.

Shimano’s Deore XT Rapidfire shifters offer a “2-way” release, allowing the upper lever
to be pulled with the forefinger or pushed with the thumb depending upon rider preference.

Ritchey’s 3D-forging process shapes each part 3 dimensionally in a single step while
carefully controlling inner wall thickness for optimal strength and weight.

WTB’s Silverado Team features an elongated shell that offers superior racer-body fit.
The long narrow length allows the rider more pedaling positions. Complete with Nico
tubular rails & kevlar protective corners.

SELLING 2011 JAMIS MTB, All Carbon Fiber Dakota DXC Pro 26er. Bike is in EXCELLENT CONDITION with Upgrades Included.

Paid MSRP $3,200

Selling Price $2,500

[Author]

Posts