Singletracks Mountain Bike News, Reviews, MTB Trails and Community › Protected: Forums › Mountain Bike Forum › Hydraulic brake trick
Tagged: bleeding brakes, bleeding mtb brakes, Brake bleed, brakes, hydraulic brake, mtb brakes, mtb repair, mushy brakes, repair
-
AuthorPosts
-
-
November 12, 2018 at 12:02 #250964
I’m new to the forum; first post. Some of you may already know this but I have a nice trick for the hydraulic brakes if you like a firm break. We used to do this on motorcycles for a tight break. I wasn’t sure if it worked on bicycles but I tried it on my old Stumpy 29 which was giving me the “mush break.”
After the brake is bled and filled (make sure there is no air in the handle), put a zip tie around the brake lever over night. Compress the lever fully but not as tight as you can. This will force out the air slowly. Make sure everything is tight so you don’t squeeze out the oil! Remove the tie in the morning and pump it once or twice. Should be soooo tight if everything else is good.
Z
-
November 20, 2018 at 21:28 #251539
will take note of that. thanks for the tip
-
-
AuthorPosts
You must be logged in to reply to this topic.