Singletracks Mountain Bike News, Reviews, MTB Trails and Community › Protected: Forums › Mountain Bike Forum › How do I remove my chain….?
Tagged: chain, chain removal, drivetrain, help, KMC X10
-
AuthorPosts
-
-
February 21, 2017 at 10:43 #208577
Hey! Just doing a couple of upgrades to my drivetrain, and wanted some help as to how I remove my chain… I read this article and I gleaned that all I had to do was move the master link towards itself…. Is that correct? And does this operation require any special tools? Thanks for your continuing help! Cheers 🙂
-
February 21, 2017 at 10:48 #208579
Not all chains have a master link. But if your chain does have one, then yes, you can push on either side of the master link to disengage. Sometimes I have to use a set of pliers to get enough force on there. Here’s a photo:
If your chain doesn’t have a master link, you need a chain tool, or at least a way to knock the pin out of one of the links. This article has some good photos to explain.
-
February 21, 2017 at 11:24 #208582
Just got this in my email after replying. Apparently Park Tool also has a set of pliers designed specifically for removing a master link.
This tool is from Bike-Tube.net and doubles as a set of tire levers.
-
February 21, 2017 at 11:26 #208583
If you have a master link you do not needs special tools, but the technique without is tricky.. do a search on youtube, there are a couple of vids.
-
February 21, 2017 at 11:31 #208584
yeah sorry I forgot to mention the chain has a master link, That’s a nifty little tool there! But I already have tire levers.. so I think I’ll just use some pliers… 🙂 Thanks!
-
-
AuthorPosts
You must be logged in to reply to this topic.