So this may be a bit on the late side but seeing that most of this stuff still hasn’t hit the stores yet I thought I’d share these pics. What I have here is a compilation of my favorite photos from the show with some brief commentary so sit back and enjoy!

By far the coolest frame set I saw (next to the Banshee Legend) is the Intense 951 pictured above. I found myself just staring at this bike for far to long and almost missed my next appointment. Up close to this frame set you can see the quality work that went in to making this one of the most desirable DH frames around. With 150mm G3 rear axle spacing, one point five head tube, and over 8 inches of travel provided by an ohhh so nice Cane Creek double barrel rear shock this bike looked delicious.

Above, the same Intense 951 in red. Still nice, and this one was built up with Shimano Saint components and an Industry 9 wheel set with a Fox 40 RC2 up front and a DHX RC4 in rear. Can you say Sweet?!

Here is something that I personally want and not just for the red and orange anodized finish. The Ellsworth Rogue is a freeride bike with attitude. Not only does it look great but I had a chance to test ride one like this at Bootleg and it was super fun (the only down side - the run was too short). With 8 inches of rear travel and the Fox 40 RC2, this bike is a kick-butt machine.

It was hard to stop looking at Intense with all their models so close yet oh so far away. Here we have a pair of Uzzi frames. The Uzzi in blue has a Fox DHX Air 5 and the Red has the standard DHX 4 coil. You can also get this bike with the Cane Creek double barrel, at a cost of course.  For those who plan on taking big hits and hitting the park all day long you may not need look any further than the Uzzi.

This Ibis above boasts builds in the 25 pound range with 5.5 inches of DW link rear travel for those who want a quicker, snappier ride on a bike that won’t punish you too much after riding all day long. The Ibis can be ordered in various trim levels from Sram XX or X-9 group parts to Shimano XTR, XT or SLX.

I love cut-aways of bike stuff and there were plenty at Interbike to ogle. Here you can see a cut-away of the Fox RP23 with boost valve technology on your left, the new improved DHX AIR RC4 in the middle, and a 32mm F series front fork with Fit technology (borrowed from the 36 and 40mm forks) on the right. The Fit damper now allows the engineers to further save weight on the 32mm line-up by reducing the amount of fluid needed in that damper housing. Get close to a new 32mm fork and you will also notice that the engineers changed up the way the fork works as well by placing the rebound adjuster on the bottom (previous models placed the lock-out on the bottom). Check out FoxRacingShox.com for further information.

Walking around Interbike you couldn’t help but notice the Mavic display. Looking at the line up for next year they have really improved the wheels, especially for the trail and enduro riders out there. The new Crossmax ST wheels are even lighter than before, now at just 1615 grams. Mavic also changed up the graphics on the rims.

The new Deemax Ultimate at 1915 grams a set is absolutely crazy light for a full-on DH wheel set. These wheels come with all the bells as whistles to make them both strong enough and light enough for the demands of the DH circuit. The Deemax wheels also sport my favorite ITS4 cassette body and ISM (inter spoke milling with central spine) which reduces mass on the rim without loosing strength.  Check out Mavic.com for more info on these and the rest of the line up.

Here is just a random photo of the new carbon Ellsworth Enlightenment. What caught my eye here is the fine machine work on a part that just holds the brake and rear wheel. This attention to detail is second to none.

This bike was another one of those that you had to stop and drool over for a while. The Banshee Rune pictured here was shown in flat black and bright orange components. The Crankbrothers Iodine AM wheels along with Race Face AM cranks and bars (not shown) really made this bike and the components just added to the already awesome construction of this frame. You have to check out the Banshee website for more information on this bike as well as the rest of their line-up.

Hubba hubba… umm sorry. But just in case you have no clue what this is, this is the new aluminum version of the Dorado DH fork from Manitou. I am dying to do a review on this unit. This fork has everything a racer would want: high and low speed compression, rebound, and top-out and bottom-out control. To top it all off, these forks are assembled right here in the States. With 36mm stanchions and an inverted design this fork will take a kicking and keep on bouncing.

Answer is back with all new products this year. New thin and stout pedals, super wide 780mm DH bars, and 720mm AM bars are also available. The bars will come in two versions: a one-inch and two-inch rise for the AM Bar and half-inch and one-inch rise for the DH bar. A direct mount stem for the Dorado allows you to change the reach from 45, 50, 55mm while providing a strong grip to the bar with its wide face plate.

Sun-Ringle has totally revamped the line-up with new hubs, rims and colors that promise to impress everyone. The hub shot above gives just a taste of what you can expect to see in 2010. Straight pull spokes, anodized hubs and aluminum cassette bodies.

What’s not to like about the new Hayes Stroker Ace look for this year? Now in jet black with bronze-ish piston covers, this is one great looking, high performance brake set. Along with the Stroker Ace the entire line up now boasts new graphics and now the Stroker Grams come in all white.

Well that does it for my list of favorites from Interbike - hope you enjoyed the pics!

XC riders looking for a versatile tire for the fall riding season, listen up! I recently tested two of the five sets of XC tires from Intense Tire Systems (ITS) in a variety of conditions and I’m finally ready to share the results. I chose the System 4 and System 5 tires for my tests but you’ll want to choose the System series that’s best for your local terrain and trail conditions.

System 4 and System 5 tires are great for those will experience a wide range of weather and also for those of us who pack a few extra pounds. Both tires are 26 x 2.25″ and have the same single-ply casing with long lasting and grippy C3 rubber compound. These tires are true 2.25-inch wide tires which means they are higher volume compared to other brands (meaning fewer pinch flats for heavier riders). Both the System 4 and 5 tires can be had for about $45 a piece.

The System 4 (left) is an all-conditions tire designed to do equally as well on soft surface as well as hard pack. The ramped and chevron tread patterns work together to keep your wheel where you want it to be. The System 5 (right) is designed for softer terrain with its mud-shedding, wide-spaced tread pattern.

I found that both sets of Intense tires mounted easily and seated nicely in the rim with a satisfying pop. As always I recommend adding a bit of talcum powder to the inside of the tire before placing the tube to reduce friction within the tire and to increase performance. After inflating both sets to 40psi, I was pumped and ready to go! (get it? )

First up: the System 4 tires. I decided to try these guys just after a good rainfall at a local trail that has a great mix of terrain, small climbs, and a few low spots. That day the trail had it all: freshly dried hardpack, wet spots, and even a little mud. On hardpack the System 4 did well and I couldn’t help but compare the performance to the Kenda Small Block 8s. System 4 offers great control on hardpack and rolls smoothly with little energy needed to get them moving. Leaning into corners there was very little squirm and they tracked well, allowing me to change lines at will without fear of loosing traction.

The large volume of this tire really opens up terrain possibilities beyond smooth hardpack. Riding over rough obstacles like rocks and logs felt quite comfortable, especially compared to other 2.00-range XC tires I’ve used in the past. With a smaller-width XC tire I would normally run the risk of pinching a flat, but with these I am glad to say did not have a problem. For that reason, this is a good tire to consider if you find yourself pushing the clydesdale line.

In very loose, wet terrain the System 4s did manage to clog a bit but luckily I had another set of tires in my quiver: the System 5s!

Changing over to the System 5 tires and hitting the same trails on the same day really gave me a good perspective on the differences between these two sets. The System 5 tire ran with a bit more vibration, but didn’t show it when the terrain turned soft. Just like the System 4, the System 5 ran with decent efficiency and didn’t suck up too much energy to get things rolling. The System 5 tread felt stable - not overly soft - and did great job at preventing wheel spin during climbs. However, when the terrain got extra muddy, the System 5s still clogged a little and slipped at times. On the descents these tires offered a ton of control and showed great stopping power.

With the aggressive tread pattern you might think these tires would squirm in corners but I always felt comfortable leaning into the soft stuff. Now on dry, hard surfaces you might not want to lean into these as much; instead, keep the bike more perpendicular to the ground for better traction. Like the System 4 tires, the added air volume was great for trudging through gnarlier trails that might normally serve up pinched tubes.

The System 5 is another great tire, especially for this time of year when the trails are a bit on the softer side and logs and rocks can be slippery and wet. Of course if the trails are really wet it’s usually best to stay off them - lets conserve the trails for everyone!

My overall impressions: System 4

8 out of 10 for climbing
8 out of 10 for rolling and efficiency
7 out of 10 for loose conditions
8 out of 10 for hardpack
8 out of 10 cornering

System 4 Specs from ITS:

Usage: Cross Country
Conditions: Soft - Intermediate - Hardpack
Size: 2.25
Compound LSG C3compound
Weight: 650 grams

My overall impressions: System 5

7 out of 10 for climbing
7  out of 10 for rolling and efficiency
9 out of 10 for loose conditions
7 out of 10 for hardpack
8 out of 10 for cornering

System 5 Specs from ITS:

Usage: Cross Country
Conditions: Soft - Intermediate
Size: 2.25
Compound LSG C3compound
Weight: 550 grams

These are certainly two good tires from ITS - choose the best ones for your terrain and riding conditions!

Cheers.

ITS - or as most people know them, Intense Tire System - recently debuted new tire updates for 2010. The 2010 Edge EXDX comes in two flavors once again - a 1-ply for all-mountain riding and a 2-ply for DH /FR. I got a chance to test the 26″ x 2.35″, single ply version ($50 MSRP) which tips the scale at about 935 grams. These tires are trail-rated for dry to soft surfaces and have a ramped and siped center tread with U-shaped side knobs.

Mounting these tires with a single tire iron on a set of Mavic Crossmax SX rims was a snap. I decided to run these tires with heavy-duty tubes and talcum powder since ITS doesn’t recommend using sealant. Filling the tires up to about 38psi front and 42 psi rear, I was off to the trails at Kelso where the conditions were mixed with both dry hard pack as well as softer sections with some mud spots.

The first bit of my ride I took some time to get used to the profile of the tire. On the ITS Edge, the tread is wider than the side wall which tends to give this tire sort of a “square” profile. This produced small amounts of squirm in flat corners, though in banked turns on berms they offered decent grip and a solid feel.

On rocky and gnarly trails with tons of roots, the Edge found its sweet spot, giving me a good sense of control. At 40psi these tires performed well but I found at lower pressures the tires started to squirm a bit too much.

Climbing and descending with the Edge was a pleasure and I found the tread design was optimal for these conditions. Starting to climb the tread got a firm hold in a variety of terrain conditions - rocks, hardpack, loam, branches and even sand. I found the tires to be just as versatile on the decent as well.

In terms of stopping power the ITS Edge comes out on top. If you’ve ever broken a bone or two on the trail you know how important stopping traction can be. Of course it’s up to you to hit the brakes but fortunately these tires won’t let you down.

All that traction can have its drawbacks: I found small serations on the knobs over just a short period of time. This may indicate a shorter tire life but more testing is needed to confirm.

All in all this is a good tire for those of us who have a long travel bike. If your terrain includes a variety of conditions this may be a good choice for you. And if you’re into climbing without slipping, this tire has your name on it!

My overall impressions:

7 out of 10 for climbing
7 out of 10 for rolling and efficiency
8 out of 10 for loose condidtion
7 out of 10 for hardpack
9 out of 10 for stopping in a straight line

Specs from ITS:

Size: 26″ x 2.35
Weight: 985 grams
Durometer: 55/60D Dual compound
Construction: 1 Ply 72 TPI Aramid Bead

The cold, wet winter days in Ontario could not keep me from testing out the Intense Micro Knobby tires.  The intended use for these tires are for riding trails, skate parks, cross country trails, soft dirt hard packed dirt or on the street.   I found the Micro Knobbies worked best on paved surfaces as I’ll detail in a moment.

First, the folks at Intense are not kidding about “micro”.  With 7500 knobs these tires look very unique with a staggering 25 knobs across the tread and arranged in a directional arrow pattern with no definite side ridge knobs.

The tires weigh an average of 655g which is decent for a 26 x 2.25 tire of that size and much lower than the advertised weight of 710g.  Fitting these tires onto a non UST rim was a snap and hardly required the use of tire irons. Figuring out the mounting direction was also easy since it was molded in the side of the tire.  Inflating the Micro Knobbies was a breeze since the beads seated nicely without much manipulation.  I inflated the tires to 45PSI and went for a ride.

The first thing I noticed with these tires is that they are fast - very fast. When I hit the streets I could pedal around in two gears higher than normal. Not only are the Micro Knobbies fast, these tires really grip the pavement and concrete. For fun I tried to lock up the front wheel, and I was almost tossed over my handle bars!

These tires have no side ridge - instead they have a near perfect circular profile. This means that if you lean into a corner on pavement they’re smooth as butter - no wobble or uneasiness - and cornering on these tires feel like your on rails. These tires run nearly silent since the knobs are so close together that there is no vibration like most fat MTB tires give off.

The tire packaging stated that these tires are suitable for use on the trails.  Unless the trail is bone dry with no soft or muddy sections, I would steer away from riding these tires on the trails.  Though the Intense Micro knobby worked well in wet (paved) conditions, these tires quickly filled up with mud on the trails.

So I will keep using the Micro Knobbies for riding on the streets and at parks.  Since the trails stay mostly wet in the winter here anyway, I now have a good excuse for riding down staircases and seeking out other urban jungle type obstacles!