1×10 modification

Forums Mountain Bike Forum 1×10 modification

--
SHARES
  

This topic contains 2 replies, has 3 voices, and was last updated by Profile photo of Dustin Gaddis Dustin Gaddis 5 years, 6 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #91348

    I want to modify my Giant Trance to a 1×10 setup. Current setup is 1×9 (32t chainring, 11/32 9spd cassette). I want to keep my 32t chainring and go with a 11/32, 11/34 or 11/36 10spd cassette. Do I have to get a new derailer/shifter/hub/rim?
    Thanks!
    J

    #91349

    all that you should need for the 10 speed conversion is a 10 speed mtn cassette, 10 speed mtn rear derailer, 10 speed mtn rear shifter, and a 10 speed chain, you also might need to get a 10 speed chainring if your current 9 speed chainring is to thick for the 10 speed chain to mesh properly.

    #91350

    Be sure you have a good way to keep the chain on the front chainring. I’d suggest the MRP 1x or whatever it’s called. Giant’s pro racer Adam Craig uses it on his Anthem race bike, and if it’s good enough for Adam…

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.